GEMINI COMPLETE · CHEMICAL ENGINEERING · EPISODE #001
Can you predict how much salt leaves a mixer?
Ravindra Dastikop · AIYING
Think · Draw the mixer
A steady-state mixer receives 100 kg/h of a 10% salt solution by mass and 50 kg/h of pure water. The mixer has one outlet. Assume there is no reaction, evaporation, or leak. Find the outlet mass flow rate and salt mass percentage.
Draw a boundary around the mixer and label both inlets and the outlet. Mark the pure-water inlet as having zero salt. Then write two balances, one for total mass and one for salt.
Ask · Get one hint at a time
Open Gemini and use the prompt below. You can attach your sketch in Guided Learning or describe it in the chat. Google’s Guided Learning instructions
Act as my Chemical Engineering tutor. A steady-state mixer has two feeds. The first is 100 kg/h of a 10% salt solution by mass. The second is 50 kg/h of pure water. There is one outlet, with no reaction, evaporation, or leak. Ask me to label the streams and draw the system boundary. Wait for my attempt. Then ask me to write a total mass balance and a salt balance. If I get stuck, give me one hint and wait again. After I submit my result, ask me to verify the salt flow in kg/h using my outlet concentration.
If you get stuck on the second equation, ask Gemini which inlet contributes salt. Convert the feed mass percentage into a mass fraction before multiplying.
Judge · Close both balances
- Total mass. The outlet carries 100 + 50 = 150 kg/h.
- Salt. The brine brings in 100 × 0.10 = 10 kg/h of salt. Pure water adds zero salt, so the outlet carries 10 kg/h of salt.
- Outlet composition. Divide salt flow by total outlet flow. (10 ÷ 150) × 100% = 6.67% salt by mass, rounded.
Check the salt balance by multiplying 150 kg/h by the unrounded mass fraction, 10/150. The result is 10 kg/h of salt. The outlet concentration also lies between the two inlet concentrations of 0% and 10%.
Common mistake. Averaging 10% and 0% gives 5%. That calculation gives equal weight to both inlet concentrations even though the two mass flow rates differ.
Accomplish · Change one input
Increase the pure-water feed to 100 kg/h. Predict how the outlet concentration changes. Calculate the new outlet flow and salt mass percentage yourself, then ask Gemini to check your reasoning.
Reveal the answer
The outlet flow is 200 kg/h. The salt flow stays at 10 kg/h. The outlet is 5% salt by mass.


No comments:
Post a Comment